Split Tanks

Split tanks are a cost effective solution where access is restricted, without the complication of special base supports which are required for sectional panel tanks and with additional savings on assembly costs.

Tank Assembly

Each tank is supplied with a fully comprehensive set of assembly instructions, and a help line is open during normal business hours. Our skilled fitting teams are available to provide assembly at a nominal cost.

Horizontally Split Tanks

Where access is restricted, Sarena offers a standard range of tanks horizontally divided into two or more sections. The sizes of the majority of our modules are designed to pass through standard doors.

Each divided tank is supplied with pre-drilled jointing flanges, nuts, bolts, washers and gasket to complete the assembly of one or two joints. This system provides a practical way of minimizing site access problems.

The range comes complete with the options of raised valve boxes, pre-insulation, hot water and chemical storage, lids and weirs. Horizontally split tanks are not available with divisions.

The size chart shows standard ranges however all Sarena tanks, irrespective of size, can be moulded as split tanks.

Size Chart for Horizontally Split Tanks

	Ref No.	Nom Cap.	Nom Cap.	Internal Dims (mm)			O/A Dims (mm) (Highest Section)			O/A Dims (mm) (Excluding Lid)			Approx Weight Plain	Approx Weight Pre-ins	Actual Cap.*
		Litres	Gallons	L	W	H	L	W	H	L	W	H	Kg	Kg	Litres
	GRP1	454	100	1220	610	610	1280	670	320	1280	670	630	22	30	282
	GRP2	681	150	1090	860	735	1190	1060	380	1190	1060	750	38	51	440
	GRP3	908	200	1170	890	890	1270	990	460	1270	990	905	46	62	650
	GRP4	1135	250	1520	910	810	1620	1010	420	1620	1010	825	60	67	753
	GRP5	1180	260	1420	910	910	1520	1010	470	1520	1010	925	65	87	832
	GRP6	1589	350	1520	1140	910	1670	1290	470	1670	1290	925	65	87	1116
	GRP7	1652	364	1400	990	1195	1500	1090	620	1500	1090	1220	78	105	1287
	GRP8	1816	400	1220	1220	1220	1320	1320	630	1320	1320	1240	83	110	1420
	GRP9	2270	500	1830	1220	1020	1980	1370	530	1980	1370	1040	90	120	1684
	GRP10	2724	600	1830	1220	1220	1980	1370	630	1980	1370	1240	112	150	2130
	GRP11	2724	600	1220	1220	1830	1370	1370	630	1370	1370	1850	140	187	2327
	GRP12	3632	800	2440	1220	1220	2640	1420	630	2640	1420	1240	170	225	2839
	GRP13	4540	1000	2440	1520	1220	2640	1720	630	2640	1720	1240	200	268	3371
	GRP14	6810	1500	3660	1520	1220	3860	1720	630	3860	1720	1240	270	350	5056
	GRP15	1000	220	1000	1000	1000	1100	1100	515	1100	1100	1015	50	67	769
	GRP16	1500	330	1000	1000	1500	1100	1100	765	1100	1100	1520	65	86	1234
	GRP17	2000	440	2000	1000	1000	2150	1150	520	2150	1150	1020	89	118	1468
	GRP18	3000	660	2000	1000	1500	2150	1150	770	2150	1150	1520	138	182	2467
	GRP19	3000	660	2000	1500	1000	2150	1650	520	2150	1650	1020	126	167	2202
	GRP20	3000	660	3000	1000	1000	3150	1150	520	3150	1150	1020	160	214	2202
	GRP21	4500	990	2000	1500	1500	2150	1650	770	2150	1650	1520	215	285	3566
	GRP22	4500	990	3000	1000	1500	3150	1150	770	3150	1150	1520	225	300	3566
	GRP23	5000	1100	2500	2000	1000	2650	2150	520	2650	2150	1020	240	315	3446
	GRP24	7500	1650	2500	2000	1500	2650	2150	770	2650	2150	1520	260	335	5818
	GRP25	3370	740	1500	1500	1500	1650	1650	770	1650	1650	1520	180	244	2775
	GRP26	8000	1760	2000	2000	2000	2200	2200	700	2200	2200	2030	370	475	6652
	GRP27	2250	495	1500	1500	1000	1650	1650	510	1650	1650	1010	105	142	1730
	GRP28	1500	328	1500	1000	1000	1650	1150	510	1650	1150	1010	80	110	1101
	GRP29	2250	495	1500	1000	1500	1650	1150	760	1650	1150	1520	130	175	1850
	GRP30	3000	660	1500	1000	2000	1650	1150	700	1650	1150	2020	195	260	2599
	GRP31	2000	440	1000	1000	2000	1150	1150	700	1150	1150	2020	135	180	1733

* To determine actual capacity, which is up to the water line, the size and type of inlet valve is required.

Vertically Split Tanks

Made to special order, with capacities up to 4000 litres nominal. The gel coat remains on the inside of the laminate to preserve the water quality. Internal flanges have sealed edges to prevent osmosis and the lids are fitted to the external flange round the top of the tank.

Fixings and gasket used with these products are the same as those used with sectional tanks. This product may include the options of lids, raised ball valve boxes, hot water or chemical storage, weirs and divisions. Note: divisions can only be located on a joint line.