Tank Fittings
UPVC Pipe Fittings
-
PFL
PN16 flanges with backing rings, gasket, stainless steel nuts, bolts and washers, sizes from ½” to 8”
PFLT
PN16 flanges threaded, with backing rings, gasket, stainless steel nuts, bolts and washers, sizes from ½” to 3”
-
PFTP
PFTP - Female iron to plain sockets sizes from ½” to 4”
PMTB
PMTB - Male iron to plain sockets sizes from ½” to 4”
-
PBEND
90 degree bends sizes from ½” to 4”
-
PDU
Double unions sizes from ¾” to 4”
-
TP
Equal tees with plain sockets sizes from ½” to 4”
-
PS
Equal plain sockets sizes from ½” to 4”
Size Chart for UPVC Pipe Fittings
| Sizes | PFL | PFLT | PBEND | PFTP | PMTP | PDU | TP | PS |
| ½" (15mm) |  |
|
|
|
|
|
|
|
| ¾"(22mm) | |
|
|
|
|
|
|
|
| 1" (28mm) | |
|
|
|
|
|
|
|
| 1¼" (35mm) | |
|
|
|
|
|
|
|
| 1½"(42mm) | |
|
|
|
|
|
|
|
| 2" (54mm) | |
|
|
|
|
|
|
|
| 2½" (67mm) | |
|
|
|
|
|
|
|
| 3"(76mm) | |
|
|
|
|
|
|
|
| 4" (108mm) | |
|
|
|
|
|
|
|
| 5"(140mm) |  |
|
||||||
| 6" (159mm) | |
|
|
|
||||
| 8" (203mm) | |
|
|
|||||
| 10"(254mm) | |
= ABS
Sparge Pipe Assemblies
This assembly is fitted when access does not permit down service to be located in the desired position with respect to inlet, thus complying with water regulations. (G16.6)
Additional Fittings
Electronic overflow warning systems - BMS compatible or stand-alone, with visual and/or audible warning.
Electronic water level indicators – BMS compatible or stand-alone, with visual and/or audible warning.
Float switches.
Temperature monitoring equipment.
Tank Connectors
-
CB
Brass Tank Connectors – with a conventional compression fitting for use with copper pipe.
-
PTC
Plastic Tank Connectors – used when connecting plastic overflow or warning pipes.
UPVC
UPVC Tank Connectors – these have a long BSP thread at one end and the other end plain. The BSP thread is designed so that an isolation valve can be located directly onto the tank connector. Conventional UPVC fittings can be glued on at the plain end.
Size Chart for Tank Connectors
| Sizes | CB | PTC | UPVC |
| ½" (15mm) | |
|
|
| ¾"(22mm) | |
|
|
| 1" (28mm) | |
|
|
| 1¼" (35mm) | |
|
|
| 1½"(42mm) | |
|
|
| 2" (54mm) | |
|
|
| 2½" (67mm) | |
||
| 3"(76mm) | |
||
| 4" (108mm) | |
||
| 5"(140mm) | |||
| 6" (159mm) | |
||
| 8" (203mm) | |||
| 10"(254mm) |
Screened Overflows
We offer a choice of design for these fittings as shown. Each unit has a stainless steel mesh maximum opening of 0.65mm to comply with Water Regulations. All the designs offered can be easily disconnected for cleaning purposes.
-
OS
-
OS
-
OSF
-
EFS
-
NOR
-
OPI
-
OP
-
PILSOF
-
PILCOM
Screened Vents
VS
VS
-
Our vents allow free movement of air and come complete with a stainless steel mesh with a amaximum opening of 0.65mm that can be removed for cleaning.
Size Chart for Screened Overflows and Vents
| Sizes | OS | OSF | ESF | NOR | OPI | OP | PILSOF | PILCOM | VS |
| ½" (15mm) | |
|
|||||||
| ¾" (22mm) | |
|
|
|
|
|
|||
| 1" (28mm) | |
|
|
|
|
||||
| 1¼" (35mm) | |
|
|
|
|
|
|||
| 1½" (42mm) | |
|
|
|
|
||||
| 2" (54mm) | |
|
|
|
|
||||
| 2½" (67mm) | |
|
|
|
|
||||
| 3" (76mm) | |
|
|
|
|
||||
| 4" (108mm) | |
|
|
|
|
||||
| 5" (140mm) | |||||||||
| 6" (159mm) | |
|
|
|
|||||
| 8" (203mm) | |
||||||||
| 10" (254mm) | |
